ISP Information:
An 8-pin serial EEPROM chip available on some SDRAM memory that keeps specific information about a DIMM's size, speed, voltage, drive strength, number of row and column addresses, DIMM manufacturer, and RAM manufacturer. If a motherboard supports SPD, it can set its BIOS automatically based on these settings to achieve maximum compatibility.
ISP Glossary:
SPD - Doug wrote in messagenews:: Rich wrote in message news:telecom22.795.4@telecom-digest.org: I have Meridian phone system with Star Talk Flash voice mail. I have M7208 sets that have "Message Waiting" constantly in the LCD panel regardless if there is a message or not. I have noticed that the "Message Waiting" changes to "Messages Waiting" when there are messages waiting. How can I fix this problem? This is what I have done so far: - deleted and created the mailbox - switch phone sets - unplugged the phone set - changed the settings for the mailbox to show and not to show "Message Waiting" I will reboot the phone system hopefully in the next day or so but this problem comes up at least once a month but I ignore it until it becomes a real hassle for my users.> Your help is greatly appreciated. Rich Rich, I don't know if my experience with this will help or not. The VM system my client was using was from CCI, not StarTalk Flash. VM used 4 ports, DN's 249, 250, 251 and 252, to connect to the KSU. The modular plug on DN 252 corroded and stopped working. I went into Maintenance and checked to see what the KSU saw. It showed the port was unequipped. I fixed the plug, then checked the status again. VM was now back on DN 252. After a few minutes, the problem cleared itself. I guess CCI's voice mail uses the highest port to connect to the KSU for Message Waiting Indicator synchronization. Good luck, Doug in DelawareHi Doug,Thanks again for your advice.The solution was entering in Feature 65 it then tells you whatmessages are waiting in your call list. It appears that the call listis phone system based which is different from voice mail; however, itstill shows the same "Message for you".Once I entered in Feature #65 and cleared the phone system basedmessage all went back to normal.Thanks.
|
